Random good picture Not show

1. Her reclining wheelchair, a chest respirator, and a small end table for her suction machine stood by.

2. As many as eleven thousand people have been killed because they refused to break their eggs at the smaller end.

3. The small end of the cycling spool uses a permanent air spring, This unbalanced cycling spool ensures that the air amplifier cycles on demand.

4. Then theoretical resonance length, small end diameter, displacement node, magnification factor, shape factor and other parameters of the amplitude amplifier pole could be determined.

5. Green roller defect on the small end radius; caused by taper die failure. A sharp protrusion on the small end of the roller.

6. NIB : Green roller defect on the small end radius; caused by taper die failure. A sharp protrusion on the small end of the roller.

7. Hold the bottle upside down with the small end of the egg in the bottle neck.

8. Plug the small end of the USB cable into the phone.

9. For export grades, small end diameter is measured at the wharf under the Japanese Agricultural Standard( JAS) convention, ie,(sentencedict.com) rounded down to the nearest even two-centimetre interval.

10. Small end note: Using the Zune theme doesn't mean you have to actually own a Microsoft Zune music player, nor do you have to do any sign-up stuff or any of that crapola.

11. In some cases the small end of the rod is clamped to the pin or has a bushing in it to allow the pin and rod oscillation.

12. Decentraction of the conn-rod small end hole center with the excircle center of the conn-rod small end hole blank, which causes the hole wall of one side getting thin with the strength dropping.

12. Sentencedict.com try its best to gather and build good sentences.

13. The connecting rod is attached to the crankshaft at one end (big end) and to the piston at the other end (small end).

14. Then Columbus took the egg and struck its small end gently upon the table so as to break the shell a little.

15. The result has shown that the fracture was caused by such surface defects as fold crack in section A at connecting rod small end.

16. This paper describes the structure and forming method of the pipe blank, structure of die, process flow, once-forming method of big end and small end of the reducer and integral once-forming method.

17. The connecting rod links its large end to the crankshaft and its small end to the piston.

18. The shape of commutator follower and U face of sleeve small end is complicate, and of high dimension accuracy demand. The machining equipment B82 NC lathe is imported form Japan.

19. In using the model DC6105 diesel engine, connecting rod cracks and its small end bushing breakdown are occasionally happened.

20. A novel ceramic screen plate comprises a plate body and suction tubes, and the plate body is composed of a functional plate, a sloping side, a big end, and a small end.

21. The connecting rod links its large end to the crankshaft and its small end piston.

22. An oil jet hole, in the rod journal end (large end) lubricates the rod small end, piston and cylinder inner surface.